Original: $10.88
-65%$10.88
$3.81The Story
Quick Setting Single Use Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product sets in only 5 minutes.
Pacer Technology Super Glue Quick Setting Epoxy (SY-QS, SYQS8, T-QS, 15250, 15350) works best on:
All-Purpose
Ceramic
Metal
Pottery
Wood
Tile
Crafts
Fabric
Properties:
Initial colour: Clear hazy to light yellow
Final colour: Light yellow
Set Time: 4-6 minutes @ 65-80F
Handling Time: After 30 minutes
Full Strength: 24 hours
Maximum Gap:25"
Hardness, Shore D: 75-83 (After full cure)
Shear Strength, Steel: 1200 psi ( 20%)
Operating Temperature Range: -40oF to +176oF (-40oC to +80oC)
Use:
1. Surfaces should be clean and dry, free of oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from containers following package directions and mix thoroughly approximately 1 minute.
4. Apply mixed epoxy to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.
Description
Quick Setting Single Use Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product sets in only 5 minutes.
Pacer Technology Super Glue Quick Setting Epoxy (SY-QS, SYQS8, T-QS, 15250, 15350) works best on:
All-Purpose
Ceramic
Metal
Pottery
Wood
Tile
Crafts
Fabric
Properties:
Initial colour: Clear hazy to light yellow
Final colour: Light yellow
Set Time: 4-6 minutes @ 65-80F
Handling Time: After 30 minutes
Full Strength: 24 hours
Maximum Gap:25"
Hardness, Shore D: 75-83 (After full cure)
Shear Strength, Steel: 1200 psi ( 20%)
Operating Temperature Range: -40oF to +176oF (-40oC to +80oC)
Use:
1. Surfaces should be clean and dry, free of oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from containers following package directions and mix thoroughly approximately 1 minute.
4. Apply mixed epoxy to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.
